Fleet Readiness Center of Department of the Navy posted this Sources Sought on Nov 17, 2026. Responses are due Dec 2, 2026. NAICS 336413 (Other Aircraft Part and Auxiliary Equipment Manufacturing), product or service code 4920 (Aircraft Maintenance and Repair Shop Specialized Equipment). Place of performance: California. Solicitation number N68520-27-RFPREQ-KN00000-0075.
SOURCES SOUGHT NOTICE
Hydraulic Actuator Flow Test Stand (HAFTS)
DISCLAIMER
THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.
ALL LARGE AND SMALL BUSINESSES THAT ARE INTERESTED SHOULD SUBMIT A CAPABILITY STATEMENT. THE RESULTS OF THIS SOURCES SOUGHT WILL BE UTILIZED TO DETERMINE IF ANY SMALL BUSINESS SET-ASIDE OPPORTUNITIES EXIST. ALL SMALL BUSINESS SET-ASIDE CATEGORIES WILL BE CONSIDERED. OTHERWISE, THIS MARKET RESEARCH IS BEING USED TO IDENTIFY POTENTIAL AND ELIGIBLE FIRMS, OF ALL SIZES, PRIOR TO DETERMINING THE COMPETITIVE METHOD OF ACQUISITION AND ISSUANCE OF A SOLICITATION.
Potential Respondents are responsible for monitoring SAM.gov for updated documentation and the latest information regarding this procurement and any potential solicitation release. No phone calls or emails requesting the status of a potential solicitation will be accepted before its release. All interested parties must monitor SAM.gov.
All data received in response to this Sources Sought Notice that is marked or designated as corporate or proprietary will be protected from release outside the Government to the extent permitted by law. Information and materials submitted in response to this request will not be returned. Classified material shall not be submitted. Respondents are advised that the Government will not pay for information or administrative costs incurred in response to this Sources Sought Notice.
This notice serves as a market research tool conducted in accordance with Federal Acquisition Regulation (FAR) Part 10 to assess potential Respondents and their technical capabilities. The findings from this market research will assist in determining the appropriate procurement strategy. Respondents that believe they possess the capability to provide the required product, either as a prime contractor or joint venture, are invited to respond.
PLACE OF PERFORMANCE
Location: Fleet Readiness Center Southwest (FRCSW) Coronado, California
ANTICIPATED CONTRACT TYPE
The Government is anticipating this effort to be a single award Firm Fixed Price (FFP) contract with FFP CLINs. The intended delivery date will be 365 days after contract award (ACA).
ELIGIBILITY
The applicable North American Industry Classification System (NAICS) code for this requirement is anticipated to be 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing, with a corresponding small-business size standard of 1,250. The Product Service Code (PSC) for this effort will be 4920 Aircraft Maintenance and Repair Shop Specialized Equipment. Businesses of all sizes are encouraged to respond. Each respondent must clearly identify its business size and socioeconomic status in its capability statement.
REQUIREMENTS INFORMATION
The Naval Air Systems Command (NAVAIR), Commander, Fleet Readiness Centers (COMFRC), Patuxent River, Maryland, is conducting market research to identify capable sources for the procurement of one (1) new Hydraulic Actuator Flow Test Stand (HAFTS) supporting the E-2C/E-2D platform. The HAFTS will replace an existing test stand and be installed at FRCSW North Island, Building 472 Hydraulic Shop.
The requirement is for a turnkey HAFTS solution. The contractor shall provide all parts, labor, materials, engineering, shipping, rigging, installation, start-up, commissioning, validation, calibration, testing, technical data, and training necessary to provide a fully operational system. No building modifications or alterations are included in the requirement.
At a minimum, the HAFTS must be capable of supporting depot-level testing of hydraulic actuators, servo cylinders, valve assemblies, landing gear actuating cylinders, wing-fold cylinders, and related E-2C/E-2D hydraulic units under test (UUTs). The test stand must perform testing in accordance with applicable NAVAIR technical publications identified in the draft Statement of Work (SOW).
The HAFTS shall include, at a minimum, the following capabilities:
Please review the attached Draft Statement of Work (SOW) and associated draft Contract Data Requirements List (CDRL)/DD Form 1423 documentation for complete requirements.
The contractor must achieve and maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 or above in accordance with DFARS 252.204-7021 for each contractor information system that will process, store, or transmit Federal Contract Information used in performance of the contract.
Contractor personnel requiring on-site access must comply with Naval Base Coronado and FRCSW access procedures, including advance submission of required access forms. The draft SOW also requires Government approval before onsite photography or videography.
Respondents capable of meeting this requirement and maintaining the capability throughout the duration of the contemplated effort are encouraged to respond.
SUBMITTAL INFORMATION (CAPABILITY STATEMENT)
All submissions shall include the Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, Declaration as to whether a U.S. or foreign company and Points of Contact (POC), including names, phone numbers, and email addresses. Capability statements should demonstrate the respondent’s ability to provide the complete turnkey HAFTS requirement described in the draft SOW.
The Government may elect not to discuss submissions received in response to this Source Sought with individual responders. There is no requirement to respond to the Sources Sought to be eligible for this procure. However, the Government places tremendous value on the information received and may utilize it to finalize its acquisition strategy. Respondents shall fully use this opportunity to describe proven capabilities in performing the requirement as described in the Draft SOW.
Documentation must address, at a minimum, the following:
Vendors should appropriately mark any data that is proprietary or has restricted data rights.
Interested Respondents shall submit capability statements (no more than 15 pages in length, single spaced, Times New Roman 11-point font) electronically in Microsoft Word or Portable Document Format (PDF) to the Contract Specialist, Stacy Miller at stacy.m.miller23.civ@us.navy.mil and the Contracting Officer, Amanda Taylor at amanda.j.taylor80.civ@us.navy.mil, no later than 5:00 PM Eastern Standard Time (EST) on 02 December 2026. If a DOD SAFE link is required for a Respondent to submit their capability statement, the Respondent must request via email to the Contract Specialist and the Contracting Officer, seven (7) business days prior to the closing of this notice. Late requests will not be accepted. When the Contract Specialist generates a DOD SAFE drop-off request for the Respondent, you will receive an email with a link to submit your drop-off. This link is good for a one-time submission; ensure that the submission is sent to both the Contract Specialist and the Contracting Officer. All questions or inquiries regarding this notice must be directed to the Contract Specialist and the Contracting Officer. Any questions regarding the Government documents must be submitted utilizing the questionnaire attachment within this sources sought notice. No phone calls will be accepted.
Subscribe to download these 2 files.
The operating system for your proposal team - for federal and state contractors. Submit a polished proposal with minimal effort.
Plans from $129 a month, or $99 a month billed yearly.