Glass Panel Replacement, St. Pete Pier

Active OpenGov-b6f27c32 RFQConstruction - BuildingCity of St. Petersburg
The full text, documents and contacts of this bid come with a ProposalWorkspace plan.Get started

At a glance

City of St. Petersburg (Florida) posted this RFQ on Nov 17, 2026. Responses are due Dec 3, 2026. Category: Construction - Building. Questions are due 2026-11-25. Solicitation number OpenGov-b6f27c32.

Solicitation details

General information

Solicitation number
OpenGov-b6f27c32
Notice type
RFQ
Place of performance
Florida
Questions due
2026-11-25

Agency and category

Agency
City of St. Petersburg
Category
005Construction - Building
Source listing
Link with a plan

About this listing

ProposalWorkspace summary

This bid was found on the agency's procurement portal. The portal's own text is not republished here; the summary below was written by ProposalWorkspace's AI from the bid documents. The full posting is on the portal - subscribe to get the link.

Summary

AI-read from the bid documents

Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.

What the bid is for

The City of St. Petersburg is accepting quotes for Glass Panel Replacement, St. Pete Pier. The City will award to one vendor.

The City of St. Petersburg is seeking quotes from qualified vendors to replace an existing shattered storefront glass panel located in the upper portion of the Tampa Bay Watch tenant building at the St. Pete Pier.

Scope

The Vendor shall provide all labor, materials, and replacement parts necessary to perform the services set forth in the scope.

Services

  • Remove and dispose of one (1) damaged insulated glass panel located at Tampa Bay Watch on the Pier: 700 2nd Ave NE, St. Pete FL 33701.
  • Verify all measurements and existing conditions before ordering or fabricating the replacement glass. The vendor shall submit manufacturer product data for the replacement glass unit to the City's Project Manager for approval before ordering or fabrication.
  • Furnish and install one (1) replacement insulated glass unit that matches the existing glass in appearance, color, thickness, configuration, and performance.
  • Install and seal the replacement glass within the existing framing system.
  • Remove all debris and clean the work area upon completion.
  • Repair or replace, at no cost to the City, any damage to adjacent glass, framing, or finishes caused by the Vendor's work.

Glass Specifications

  • Glass Type: Insulated glass unit with laminated interior lite
  • Overall Thickness: 1 1/4 inches
  • Exterior Glass: 6 mm Optiblue® with Solarban® 70 coating on the second surface (Solarban® z75)
  • Air Space: 1/2 inch (12.7 mm)
  • Interior Glass: Laminated, 6 mm clear glass / 0.090-inch interlayer / 6 mm clear glass
  • Visible Light Transmittance: 44%
  • Solar Heat Gain Coefficient (SHGC): 0.22
  • Winter U-Value: 0.28
  • Summer U-Value: 0.26

Glass Dimensions

The replacement glass shall be trapezoidal in shape and match the attached dimensional drawing elevation CW-Y. The Vendor shall verify all measurements before fabrication.

  • Top Width: 41 1/16 inches
  • Bottom Width: 41 inches
  • Left Height: 89 3/8 inches
  • Right Height: 87 15/16 inches
  • Approximate Glass Area: 25.2619 square feet

Permits

The Vendor shall obtain any permits required by the City of St. Petersburg for this work and include permit fees in its quote. The Vendor shall schedule all required inspections. Work will not be considered complete until it passes final inspection. All work shall comply with the Florida Building Code, including wind-load requirements.

Warranty

The Vendor shall provide all applicable manufacturer's warranty for the replacement glass and any applicable workmanship warranty for the installation.

Additional information

**Submission method:** Submittals must be uploaded utilizing the OpenGov Procurement website. Submittals sent via email or delivered in-person will not be considered. Vendors must be registered within the OpenGov Procurement system in order to participate in City solicitations. All questions must be submitted in OpenGov within the Question and Answer section.

Pre-proposal attendance: Mandatory.

**Licensing (required):** The Vendor shall hold one of the following active Florida licenses: Glass and Glazing Contractor, General Contractor, or Building Contractor. The Vendor shall also be registered to work in Pinellas County. The Vendor shall submit a copy of its license with its quote.

**Evaluation:** Each submission shall be evaluated and ranked by an Evaluation Committee. The contract will be awarded to the most qualified Vendor, per the evaluation criteria listed in the solicitation.

Insurance:

  • Commercial general liability insurance of at least **$1,000,000** per occurrence, **$2,000,000** aggregate.
  • Commercial automobile liability insurance of **$1,000,000** combined single limit.
  • Workers' Compensation insurance as required by Florida law and Employers' Liability Insurance of at least $100,000 each accident, $100,000 per employee, and $500,000 for all diseases.

**Bonds:** Bid Bonds: If applicable, must be uploaded with offeror's submittal prior to the solicitation close date.

**Term:** The initial term of the agreement will commence upon contract execution and will continue until the completion and acceptance of the work by the City. All work shall be completed within 60 calendar days after contract execution, unless the City approves an extension in writing.

Documents

5 files

Subscribe to get these 5 documents.

Similar open bids

In Florida

More from City of St. Petersburg

Open bids