RFP 27-25 3 Small Buoy - Design Specifications for Three Small Environmental Ocean Buoys

Active USM-A8AADFC7 RFPLaboratory & ScientificUniversity of Southern Mississippi
The full text, documents and contacts of this bid come with a ProposalWorkspace plan.Get started

At a glance

University of Southern Mississippi (Mississippi) posted this RFP on Nov 12, 2026. Responses are due Dec 3, 2026. Category: Laboratory & Scientific. Solicitation number USM-A8AADFC7.

Solicitation details

General information

Solicitation number
USM-A8AADFC7
Notice type
RFP
Place of performance
Mississippi

Agency and category

Agency
University of Southern Mississippi
Category
025Laboratory & Scientific
Source listing
Link with a plan

About this listing

ProposalWorkspace summary

This bid was found on the agency's procurement portal. The portal's own text is not republished here; the summary below was written by ProposalWorkspace's AI from the bid documents. The full posting is on the portal - subscribe to get the link.

Summary

AI-read from the bid documents

Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.

What the bid is for

The University of Southern Mississippi (USM) has developed a test and evaluation area in the Gulf of America. Several large widely spaced long-term fixed and mobile systems are routinely deployed in this area.

Many of the current programs are conducted in small subset areas in the Gulf of America and require only small sets of local environmental measurements. To support these programs USM will purchase three small environmental buoys that can easily be deployed form small vessels and operate for about 3 months. These buoys will be used to measure a small local suite of environment and oceanographic parameters that will be discussed below. The water depths range from 30 to 150 ft.

Scope

General Buoy System Requirements

  • The compete system will consist of 3 buoys, each with specific measurement system requirements
  • Two of the buoys shall each have weather stations, wave, and water quality measurement systems
  • The third buoy shall have a downward looking ADCP, a weather station, and a wave measurement system
  • The buoy diameter shall not exceed 1.3 m
  • The buoy buoyancy shall be at least 200 kg with a total weight no greater than 400 kg
  • The buoys shall each have a Marine Becan and a Radar Reflector
  • Each buoy shall have at least a 35 AH battery pack in a waterproof house
  • Each buoy shall have at least 4 x15 watt solar panels
  • Each buoy shall have at least 3 lifting points
  • Each buoy shall have a reporting GPS positioning system.
  • The buoys shall be made of a combination of marine aluminum and 316 stainless steel
  • The hulls shall have anode protection
  • The buoys shall have IP66/IP68 environmental protection
  • The vendor shall provide an internal data logger and control system in a waterproof housing [...]
  • The data from each of the buoy’s sensors will initially be internally logged every 15 minutes, and transmitted hourly to USM’s data center using either iridium or STARLINK data links.
  • The end user shall have 2-way comms with each of the buoys.
  • The vendor shall provide a comprehensive mooring design for each measurement buoy
  • The vendor shall provide all the required cables for complete system testing, setup, and operation
  • The vendor shall supply three complete working systems with sensor setup and visualization software
  • The buoys shall be delivered to USM’s Marine Research Center, 1030 30th ave Gulfport MS. USA

Software

The vendor shall provide the Complete Software Packages and product documentation for these systems. This includes system set up, configuration, and visualization modes for all sensors.

Training

The vendor shall provide training on the operation, software, integration, maintenance, and troubleshooting for all buoy systems. This must include mission planning and basic mission data analysis and display.

Additional information

Your quotation will be given consideration if received in Bond Hall, Room 214 on or before **2:00 p.m. CT** on **December 3, 2026**. Return quotation to Procurement Services at above address.

PROPOSAL MUST BE RETURNED TO THE UNIVERSITY IN ACCORDANCE WITH THE SPECIFICATIONS. RFP NUMBER AND DATE OF BID OPENING MUST BE SHOWN ON THE OUTSIDE OF THE ENVELOPE IF USING THAT METHOD.

Terms: Our terms are 2% ten days, net 45 days. [...] **Signature Required**.

The vendor shall provide a data pipeline description with the submitted bid. The vendor shall provide power budget calculations for each operating buoy. There shall be a design review one month after contract award.

The vendor shall provide a proven record of the buoy measurements and operating system performance. The vendor needs to provide references where these systems and their operating system in a similar configuration as specified above have operated successfully over the last 3 years.

At a minimum, the vendor shall provide software/hardware warranty support for one year from acceptance. Longer warranty periods are preferred.

Documents

1 file

Subscribe to get this document.

Similar open bids

In Mississippi

More from University of Southern Mississippi

Open bids