French Road IRA Partial Roof Replacement

Active 2140639 IFBConstruction - BuildingNew York State Office for People with Developmental Disabilities
The full text, documents and contacts of this bid come with a ProposalWorkspace plan.Get started

At a glance

New York State Office for People with Developmental Disabilities (New York) posted this IFB on Nov 6, 2026. Responses are due Nov 20, 2026. Category: Construction - Building. Solicitation number 2140639.

Solicitation details

General information

Solicitation number
2140639
Notice type
IFB
Place of performance
New York

Agency and category

Agency
New York State Office for People with Developmental Disabilities
Category
005Construction - Building

About this listing

ProposalWorkspace summary

This bid was found on the agency's procurement portal. The portal's own text is not republished here; the summary below was written by ProposalWorkspace's AI from the bid documents. The full posting is on the portal - subscribe to get the link.

Summary

AI-read from the bid documents

Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.

What the bid is for

The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to scope of work and architectural drawings if supplied. Work is to be completed within 30 days of award, unless modified below. This is a NYS Public Works project and prevailing wages are to be paid, PRC# 2026030260.

**Facility:** 315 French Rd. Utica N.Y. 13502

Project Title: Roof Replacement. Summary of Work: Partial roof replacement.

Scope

General Requirements

The scope of this work includes all labor and material, equipment, and services necessary to complete the work herein specified at various locations throughout the Central New York Developmental Services county areas.

All work and materials shall conform to the 2020 New York State Residential Building Code with the following exceptions:

  • Staples and aluminum nails are not allowed.
  • Open valleys are not permitted.
  • Valley linings shall be specialty underlayment complying with ASTM D 1970 and at least 36” wide centered in the valley.
  • An ice barrier shall only consist of a self-adhering polymer bitumen sheet and extend to a point at least 36” inside the exterior wall line of the building, as per R905.2.7.1.

No asbestos-containing products or materials may be used. Do not install shingles, felt, or sheathing when it is raining or over wet surfaces. Do not apply shingles when air temperature is below 32 degrees Fahrenheit.

Demolition and Disposal

The contractor shall strip all existing materials down to the roof sheathing and dispose of them. This includes but is not limited to shingles, underlayment, flashing and any other roofing components.

Plywood Replacement

  • Plywood shall match existing decking, OSB not acceptable.
  • Plywood sheets that need replacing will be paid for at **$155 per sheet**.

Flashing and Penetrations

All existing flashing and drip edge shall be removed and replaced with new flashing and drip edge. 2” aluminum drip edge color matched to the trim shall be installed along the rake and eave edges of the roof. Roof penetration boots shall also be removed and replaced with new boots. Chimneys: Crickets shall be installed above chimneys, sized and sloped to direct water around the chimney.

Ice and Water Barrier

The contractor shall install an ice and water barrier that extends 36” inside the exterior wall line of the building, using a self-adhering polymer bitumen sheet.

Synthetic Underlayment

The contractor shall install Pro Armour synthetic underlayment on the entire roof surface, except in valleys where specialty underlayment complying with ASTM D 1970 shall be used.

Shingles

  • Starter shingles: Owen Corning Duration brand starter shingles shall be installed.
  • Hip and roof shingles: Owen Corning Duration brand shingles shall be installed on hips and the entire roof surface.
  • Fastening: Shingles shall be fastened with a minimum of 6 nails per shingle, installed according to manufacturer specifications and code requirements.

Hip and Ridge

Pro Edge hip and ridge components from Owen Corning Duration brand shall be installed.

Additional information

Site visit

A site visit is **mandatory**. The site visit date is scheduled for Thursday, November 12th at 10 a.m. at the project site.

Insurance

The State of New York Office for People with Developmental Disability will be expressly named as additional insured on each policy in accordance with above. The necessary Certificates of Insurance of the awarded bidder must be forwarded to the OPWDD liaison within 14 days after notice.

Policies covering bodily injury, liability and property damage of the types hereinafter specified, each with limits of liability not less than **$1,000,000.00** for all damages arising out of bodily injury, including death at any time resulting there from, sustained by one person in any one accident, and subject to that limit for that person, and not less than **$2,000,000.00** for all damages arising out of bodily injury, including death at any time resulting there from, sustained by two or more persons in any accident and not less than **$2,000,000.00** for all damages arising out of injury or destruction of property.

Other requirements

Work must be guaranteed for at least one year. Warranty is to include parts, materials, and labor. Contractors must be registered with the New York State Department of Labor before submitting a bid. Prior work performance will be used as an evaluation tool in the award decision.

Similar open bids

In New York

More from New York State Office for People with Developmental Disabilities

Open bids