RFQ - AS-NEEDED THERMOPLASTIC PAVEMENT MARKING MATERIALS (RESERVED FOR SMALL LOCAL BUSINESSES)

Active BPM013481 RFQConstruction - Heavy & CivilCounty of San Diego
The full text, documents and contacts of this bid come with a ProposalWorkspace plan.Get started

At a glance

County of San Diego (California) posted this RFQ on Nov 18, 2026. Responses are due Dec 7, 2026. Category: Construction - Heavy & Civil. Questions are due 2026-11-23 17:00. Solicitation number BPM013481.

Solicitation details

General information

Solicitation number
BPM013481
Notice type
RFQ
Place of performance
California
Questions due
2026-11-23 17:00

Agency and category

Agency
County of San Diego
Category
006Construction - Heavy & Civil
Source listing
Link with a plan

About this listing

ProposalWorkspace summary

This bid was found on the agency's procurement portal. The portal's own text is not republished here; the summary below was written by ProposalWorkspace's AI from the bid documents. The full posting is on the portal - subscribe to get the link.

Summary

AI-read from the bid documents

Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.

What the bid is for

The County of San Diego (County), Department of Public Works, Transportation Division Roads Division has a requirement for a contactor to provide as-needed thermoplastic pavement marking materials.

The County anticipates awarding a contract with a term of one year, plus two one-year options.

In accordance with Board Policy A-87, the award of contracts resulting from this RFQ is reserved for Small-Local Businesses as defined in Board Policy B-53 Small-Local Business Policy (SLBP). To be considered for award, Offeror must successfully certify that they qualify as a Small-Local Business.

Scope

The County, Department of Public Works (DPW) is responsible for maintaining nearly 2,000 miles of road in the unincorporated areas of San Diego. DPW must make sure that the roadways are safe for the public and emergency vehicles to always use. Thermoplastic pavement markings are used in addition to traffic signage to help provide guidance to the public at night and during adverse weather conditions.

Specifications

  • A durable, high skid resistant, retroreflective pavement marking material suitable for use as interstate shields, route shields, bike path, roadway, intersection, airport, commercial or private pavement delineation and markings.
  • The markings must be a resilient white, yellow, green, blue, red, or other County-approved color thermoplastic product.
  • The manufacturer must be ISO 9001:2015 certified, or current equivalent, and provide proof of current certification.
  • The material shall meet the current CA MUTCD, Caltrans Standard Specifications Section 84 - Markings, Caltrans Standard Plans, applicable County requirements, AASHTO M249 or current equivalent, and the manufacturer's published material specifications.
  • Preformed thermoplastic material must be supplied at a minimum thickness of 90 mils (2.29 mm) or 125 mils (3.15 mm), as specified in Exhibit C or by County order.

Order/Deliveries

  • All deliveries must be made during business hours: Tuesday – Friday from 7:00 am – 4:00 pm PST.
  • Vendor shall deliver materials to Division 1 Headquarters, 11970 Singer Lane, Spring Valley, Ca 91978.
  • Vendor shall deliver materials within 10 days of initial request.
  • The vendor must replace any goods that are damaged, incorrect or defective within 5 business days at no cost to DPW.

Warranty

The vendor shall warrant all thermoplastic pavement markings installed under this Contract against premature failure, including peeling, lifting, delamination, cracking, excessive wear, or loss of adhesion, for a period of 24 months from the date of installation or acceptance, whichever is later.

Technical Services

Contractor shall provide technical services consisting of product documentation, safety documentation, installation guidance, and ongoing technical support. [...] The Contractor shall provide current product data sheets for each thermoplastic pavement marking material furnished under this contract. [...] The Contractor shall provide current Safety Data Sheets (SDS) for each product furnished under this contract.

Additional information

Submission

Submit your response, including completed forms via BuyNet. Your response is due through electronic upload to BuyNet on the specified close date and time, local San Diego time.

Required forms

  • Offeror's Cover Page (*PC600*)
  • Representations and Certifications form (*PC601*)
  • Small-Local Business Self-Certification Form (*PC610*), **required** for all Offerors
  • Nondisclosure Indemnification Agreement (*PC620*), if applicable
  • Pricing Schedule, posted to BuyNet as a file named rfq_13481_pricing_schedule.xlsx

Evaluation

Submittals will be evaluated based upon price. Quotations are subject to acceptance at any time within 90 days after submission due date/time, unless otherwise stipulated by the County. Lowest price may not always be the sole criteria for award of an RFQ.

Other terms

  • Pricing is Firm Fixed for the Initial Term and all Option Periods.
  • Quote F.O.B. Destination pricing only.
  • Samples, at Offeror's expense, may be required for evaluation by the County.
  • Payment terms are NET 30, unless terms more favorable to the County are included in Offerors quotation.
  • Quote must state the brand name or equal.
  • All items must be quoted for supplier to be considered responsive.

Documents

2 files

Subscribe to get these 2 documents.

Similar open bids

In California

More from County of San Diego

Open bids