63100PR270000009 Repair Floating Dock

Contractor to provide all labor, materials, and equipment necessary to repair the floating Jet Docks, BLDG 292. Work consists of:

• Remove and replace 18 damaged large Module Assemblies (MAs).
• Remove and replace 40 open well style or damaged small MAs and replace with standard small MAs.
• Remove and replace keel deflection system (KDS) on all nine docks.
• Remove and replace all pontoon straps and hardware (36” lifting eyes) for all nine docks.
• Remove and replace all 27 structural support beams and all 18 pontoon guide beams across all nine docks – 45 total.
• Install new cathodic protection system on all beams – 45 total.
• Remove valves and wiring on powerhead for all nine docks and replace with standard valves and wires.
• Install two freshwater washdown hoses, 40 ft length, per dock – 18 total.
• Install protection system between MAs and piling – one per dock, nine total.
• Install bunk tusk system, one per dock, nine total.
• Rebuild the dock stern to include intermediate corrugation support on all nine docks.
• Remove and replace any damaged pontoons with the same size and kind. If no longer in production, replace with closest approximation – approximately 6 pontoons.
• Install additional MAs on docks that are assigned the 29 ft RB-S II boats – 5 docks total, approximately 30 large MAs, 5 small MAs.

• Install new inner bunk systems on all docks to accommodate the boats described below:
  • 29 ft RB-S II boats (8,400 lbs),
  • 26 ft TANB boats (7,300 lbs), and
  • 26 ft CB-OTH-V boats (7,470 lbs).
• Calibrate existing and replacement pontoons for the boats described above.
• For a layout of dock assignments, refer to the included drawing 2-29202-1.