FIRE STATION 63 HAZARDOUS MATERIALS ABATEMENT PROJECT

The Project includes furnishing all labor, materials, equipment, supervision, and incidentals necessary to perform hazardous materials abatement at the existing building, including removal and disposal of identified asbestos-containing materials; lead-related work required by the Contract Documents; and associated selective removal, containment, cleanup, waste handling, and transportation.

Work shall be performed in accordance with the project Hazardous Building Materials Survey, Asbestos Abatement Specifications, Lead-Related Demolition Specifications, applicable regulations, and City requirements.

Specification for the abatement of identified asbestos-containing materials (ACM) throughout the single-story building located at 71 – 75 Camaritas Avenue in South San Francisco, California.

The following identified ACM are to be removed from the site building:

• Approximately 1,000 SF of black mastic associated with 12” tan vinyl floor tiles located in the main room of the liquor store area of the building, containing 5% chrysotile asbestos;
• Approximately 800 SF of wallboard joint compound located along the west and south walls of the main roof of the liquor store area and the restroom at the rear of the building, containing 2% chrysotile asbestos; and
• Approximately 400 SF of wall texture on wallboard walls located along the west wall of the main roof of the liquor store area of the building, containing 2% chrysotile asbestos.

The scope of work under this section consists of furnishing all labor, materials, facilities, equipment, services, employee training and testing, permits and agreements necessary to perform the lead-related demolition and legal disposal of lead-containing paint (LCP) identified in the Pre-Demolition Hazardous Building Materials Survey, Liquor Store/Restaurant Building, 71 – 75 Camaritas Avenue, South San Francisco, California (SOCOTEC, September 29, 2026), and associated sample location maps/plans in accordance with the latest applicable federal, state, and local government regulations and these specifications.

The following materials were identified as lead-containing paints:

• Tan paint on wood wall panels inside the Liquor Store
• Brown paint on wood wall trim on the exterior of the building

The following material was identified as a lead-containing bulk material:

- 4” white ceramic tile countertop at front desk area of the Restaurant

Obtain all special permits and licenses and make all required notifications to the appropriate government regulatory agencies (Bay Area Air District, etc.) required for performance and completion of the abatement work.

Prior to the start of abatement activities, the contractor shall submit one (1) copy of the work plan for removal of the identified ACMs, including a detailed plan of work procedures, work areas and proposed timelines for removal activities.

Submit within three (3) days of start date of contract, one (1) copy of the training documentation for each supervisor and worker who will be on-site for this project.

Any substitution in materials or methods to those specified shall be approved by the Client prior to use. Requests for substitution shall be provided in writing to the Client’s representative.

The contractor will not be released from the work area(s) until all clearance samples collected are determined to have fiber concentrations less than 0.01 f/cc.

Prior to final payment, the contractor shall finalize disposal receipts for all waste.