Components for UW's Lead-Lithium MHD Loop

Active 2027-UWMSN-01529-RFB IFBLaboratory & ScientificUniversity of Wisconsin-Madison
The full text, documents and contacts of this bid come with a ProposalWorkspace plan.Get started

At a glance

University of Wisconsin-Madison (Wisconsin) posted this IFB on Nov 11, 2026. Responses are due Nov 19, 2026. Category: Laboratory & Scientific. Solicitation number 2027-UWMSN-01529-RFB.

Solicitation details

General information

Solicitation number
2027-UWMSN-01529-RFB
Notice type
IFB
Place of performance
Wisconsin

Agency and category

Agency
University of Wisconsin-Madison
Category
025Laboratory & Scientific
Source listing
Link with a plan

About this listing

ProposalWorkspace summary

This bid was found on the agency's procurement portal. The portal's own text is not republished here; the summary below was written by ProposalWorkspace's AI from the bid documents. The full posting is on the portal - subscribe to get the link.

Summary

AI-read from the bid documents

Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.

What the bid is for

The University of Wisconsin-Madison, hereinafter referred to as the “University”, through its Purchasing Services Department, hereinafter referred to as “Purchasing”, on behalf of The Department of Nuclear Engineering and Engineering Physics, hereinafter referred to as “Department”, requests bids for the purchase of a number of major components for their lead-lithium experimental MHD loop.

This bid request includes equipment needed to finalize the construction of the MAGNES (Liquid Metal Under Electromagnetic Fields) facility in MSE 140 Lab of the Materials Science and Engineering Building. This facility is being built to investigate the effects of magnetic fields on lead-lithium (Pb-Li) flow in fusion blanket applications.

Scope

**Four components for a Pb-Li experimental facility:** An ingot crucible, a horizontal dump tank, a counterflow tube-in-annulus heat exchanger, and a vertical expansion tank.

  • PbLi Ingot Crucible: a metal tank to fit ~3 inches PbLi ingots with a volume of approximately 3 gallons that will be used to melt PbLi at a temperature of 240oC. The crucible will support preparation of the Pb-Li inventory for facility operation.
  • Dump tank: Horizontal cylindrical dump tank for lead-lithium storage supporting the MAGNES Pb-Li experimental loop. The tank will receive and hold approximately 30 L of Pb-Li drained from the loop, allowing the liquid-metal inventory to be collected and recovered during experimental operations. The tank must be suitable for operation at 40 psig, a nominal temperature of 300 °C, and temperatures up to 450 °C.
  • Expansion tank: Vertical expansion tank for the Pb-Li experimental loop. The tank will provide expansion volume and gas space for the loop and interfaces for overhead gas service, vacuum/pressure relief, gas-pressure sensing, internal temperature measurement, and point-level sensing.
  • Heat Exchanger: The heat exchanger will remove heat from the circulating Pb-Li using Therminol LT. It must provide at least 75 kW of heat-removal capacity at the purchaser-defined design point. The purchaser will supply and circulate the Therminol LT and provide the external heat-rejection equipment.

Contractor must provide two copies or an electronic version of the operating, installation, and maintenance instructions and assembly/interface drawings and a final as-built 3D CAD of the supplied component.

A completed copy of that specification checklist must be returned with your bid.

Additional information

**Submission method:** The University is accepting electronic responses via the Sourcing Module. Required materials must be received by the due date and time listed. All Bids MUST be submitted by **2:00 PM Central Time** on the stated due date. Late bids will not be accepted.

To respond to this event, bidders must have an online profile with JAGGAER.

Award shall be made based on the lowest net line-item price(s) and/or the lowest net lot total(s), which is judged to be in the best interest of the University.

All deliveries shall be FOB Destination. The University will pay the Contractor Net30 as accepted by the University.

The Contractor shall maintain insurance levels as required in the DOA 3054 Standard Terms and Conditions – Section 23.0. A certificate of insurance must be provided upon request.

The University, at its sole discretion, may require oral presentations, product demonstrations and/or vendor location site visits to validate information submitted with the bids.

The public bid opening will be held virtually at 3:00 pm CT on Thursday, November 19, 2026.

Documents

4 files

Subscribe to get these 4 documents.

  • 2027-UWMSN-01529-RFB - event notice.pdf
    Download
  • 1-Time Purchase Terms and Requirements for 2027-UWMSN-01529-RFB.pdf
    Download
  • DOA-3054StandardTermsandConditionsRFB-RFP.doc
    Download
  • Applicable_Federal_Rules.docx
    Download

Similar open bids

In Wisconsin

More from University of Wisconsin-Madison

Open bids